30
Operation with Audio and MP3/WMA Disc (Continued)
Pause
1 Press
;;
during playback.
2 To return to playback, press PLAY
22
or press
;;
again.
Moving to another Track
Press SKIP/INDEX . or > briefly during
playback to go to the next track or to return to the
beginning of the current track.
Press SKIP/INDEX . twice briefly to step back to
the previous track.
In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
Repeat Track/All/Off
1 To repeat the track currently playing, press REPEAT.
The Repeat icon and “TRACK” appears on the menu
screen.
2 To repeat all tracks on a disc, press REPEAT a
second time.
The Repeat icon and “ALL” appears on the menu screen.
3 To cancel Repeat mode, press REPEAT a third time.
The Repeat icon and “OFF” appears on the menu screen.
Search
1 Press and hold SKIP/INDEX . or > for about
two seconds during playback.
The player will now go into SEARCH mode.
2 Press and hold SKIP/INDEX . or > repeatedly
to select the required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3 To exit SEARCH mode, press PLAY 2.
Random
1 Press RANDOM during playback or when playback is
stopped.
The unit automatically begins Random Playback and
“RAND.” appears on the menu screen.
2 To return to normal playback, press RANDOM
repeatedly until “RAND.” disappears on the menu
screen.
Repeat A-B
To repeat a sequence.
1 During disc playback, press REPEAT A-B at your cho-
sen starting point.
The Repeat icon and “
A-
” appears on the menu screen.
2 Press REPEAT A-B again at your chosen end point.
The Repeat icon and “A B” appears on the menu screen,
and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal play, press
REPEAT A-B again.
The Repeat icon and “OFF” appears on the menu screen.
Note
If the interval between A and B is too short, you may not
be able to set the sequence.
3D Surround
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to
multi-channel audio from a home theater system.
1 Press DISPLAY or AUDIO MONITOR during
playback.
2 Press
11
/
22
to select “NORM.” or “3D SUR”.
3 Press
33
/
44
repeatedly until the desired sound is
selected.
Changing the Audio Channel
Press AUDIO MONITOR repeatedly during playback to
hear a different audio channel (STER., LEFT, or
RIGHT).
CD
CD
CD
CD
CD
WMA
MP3CD
WMA
MP3CD
WMA
MP3CD
To Next Page
Loading...
