ENGLISH
5INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also pages 32 and 33.
1
Turn on the power.
2
Enter the PSM settings.
3
Cancel the display demonstrations
Select “Demo,” then “Off.”
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
4
Finish the procedure.
Changing the display information and pattern
When the power is turned off : Check the current clock time
Ex.: When tuner is selected as the source
Source operation display Audio level meter display
(see “LevelMeter” on page 32)
EN02-07_KD-BT22[E]_006A_f.indd 5EN02-07_KD-BT22[E]_006A_f.indd 5 1/28/08 9:38:50 AM1/28/08 9:38:50 AM
To Next Page
Loading...
