ENGLISH
11OPERATIONS
Continued on the next page
5 Select one of the PTY codes.
6 Store the selected PTY code.
7 Repeat steps 4 to 6 to store other PTY codes
into other preset numbers.
8 Exit from the setting.
Activating TA/PTY Standby
Reception
TA Standby Reception
1
2
either lights up or flashes on the display.
• If lights up, the unit temporarily will switch
to Traffic Announcement (TA), if available, from
any source other than AM and FM3 *.
The volume changes to the preset TA volume
level if the current level is lower than the preset
level (see page 30).
• If
flashes, TA Standby reception is not yet
activated. Tune in to another station providing
the RDS signals.
To deactivate TA Standby Reception, select “Off” in
step 2. goes off.
PTY Standby Reception
1
2
3
Select a PTY code.
4 Exit from the setting.
either lights up or flashes on the display.
• If lights up, the unit temporarily will switch
to your favorite PTY programme from any source
other than AM and FM3 *.
• If flashes, PTY Standby reception is not yet
activated. Tune in to another station providing
the RDS signals.
To deactivate PTY Standby Reception, select “Off”
in step 2. goes off.
* The unit will not switch to Traffic Announcement or
PTY programme when a call connection is established
through the Bluetooth Phone.
Ex.: When “Classics” is selected in step 5
EN08-15_KD-BT22[EE]_8.indd 11EN08-15_KD-BT22[EE]_8.indd 11 1/25/08 3:17:47 PM1/25/08 3:17:47 PM
To Next Page
Loading...
Need help?
General
