JVC KD-ABT22

ENGLISH
29SETTINGS
2
3 Select a source.
All Source *
1
Ô CD Ô Changer *
3
(or
Ext In *
2
) Ô USB *
3
Ô FM Ô AM Ô
iPod *
3
Ô Aux In Ô BT Audio Ô (back to
the beginning)
*
1
When you select “All Source,” you can use the
same color for all the sources.
*
2
Depends on the “Ext Input” setting, see page 28.
*
3
Displayed only when the target component is
connected.
4 Select a color.
Pale
Ô Aqua Ô Sky Ô Sea Ô Leaves
Ô Grass Ô Apple Ô Rose Ô Amber Ô
Honey Ô Violet Ô Grape Ô Every *
4
Ô
User *
5
Ô (back to the beginning)
*
4
The color changes every 2 seconds.
*
5
The user-edited colors—“Day Color” and
“NightColor” will be applied (see page 30 for
details).
5 Repeat steps 3 and 4 to select the color for
each source (except when selecting “All
Source” in step 3).
6 Exit from the setting.
Setting the time for dimmer
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Follow steps 1 to 3 on page 26.
• In step 2, select “DISP.”
• In step 3, select “Dimmer.”
2 Select “Time Set.”
3 Adjust the dimmer start time.
1 Turn the control dial to set the dimmer start
time.
2 Press ¢ to select “To.” Then, turn the
control dial to set the dimmer end time.
4 Exit from the setting.
Changing the display color
You can select your favorite display color for each source
(or all sources).
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
Setting the display color
1 Follow steps 1 to 3 on page 26.
• In step 2, select “COLOR.”
• In step 3, select “Color Sel.”
Continued on the next page
EN24-29_KD-BT22_001A_1.indd 29EN24-29_KD-BT22_001A_1.indd 29 12/17/07 11:30:39 AM12/17/07 11:30:39 AM