EasyManuals Logo

JVC KD-ABT22 User Manual

JVC KD-ABT22
314 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #304 background imageLoading...
Page #304 background image
ENGLISH
38
Symptoms Remedies/Causes
MP3/WMA/AAC playback
Disc cannot be played back. Use a disc with MP3/WMA/AAC tracks recorded in
a format compliant with ISO 9660 Level 1, Level 2,
Romeo, or Joliet.
Add the extension code <.mp3>, <.wma>, or
<.m4a> to the file names.
Noise is generated. Skip to another track or change the disc. (Do not add
the extension code <.mp3>, <.wma>, or <.m4a> to
non-MP3/WMA/AAC tracks.)
A longer readout time is required
(“Reading” keeps flashing on the display).
Do not use too many hierarchical levels and folders.
Tracks do not play back in the order you
have intended them to play.
The playback order is determined when the files are
recorded.
The elapsed playing time is not correct. This sometimes occurs during playback. This is caused
by how the tracks are recorded on the disc (eg. variable
bit rate).
“Please Eject” appears on the display. Insert a disc that contains MP3/WMA/AAC tracks.
“Not Support” appears on the display and
track skips.
Skip to the next track encoded in an appropriate format
or to the next non-copy-protected WMA track.
Correct characters are not displayed (e.g.
album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of symbols
(see page 32).
USB device
Noise is generated. The track played back is not a playable file format
(MP3/WMA/AAC/WAV). Skip to another file.
Do not add the extension code <.mp3>, <.wma>,
<.m4a>, or <.wav> to non-MP3/WMA/AAC/WAV
tracks.
Tracks cannot play back as you have
intended them to play.
Playback order may differs from the one played back
using other players.
“Reading” keeps flashing on the display. Readout time varies depending on the USB device.
Do not use too many hierarchy, folders and empty
folders.*
Turn off the power then on again.
Do not pull out or connect the USB device repeatedly
while “Reading” is displayed on the display.
* Folder that is phisically empty or folder that contains
data but does not contain valid MP3/WMA/AAC/WAV
track.
EN38-43_KD-BT22_001A_1.indd 38EN38-43_KD-BT22_001A_1.indd 38 12/12/07 12:03:56 PM12/12/07 12:03:56 PM

Table of Contents

Other manuals for JVC KD-ABT22

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-ABT22 and is the answer not in the manual?

JVC KD-ABT22 Specifications

General IconGeneral
BrandJVC
ModelKD-ABT22
CategoryCar Receiver
LanguageEnglish

Related product manuals