ENGLISH
19OPERATIONS
When a call comes in....
The source is automatically changed to “Bluetooth.”
• Phone number appears (if acquired).
When “Auto Answer” is activated....
The unit answers the incoming calls automatically, see
page 37.
• When “Auto Answer” is deactivated, press any
button (except
/control dial) to answer the
incoming call.
• You can adjust the microphone volume level (see
page 37).
To end the call or reject an incoming call
Hold any button (except /control dial).
• When “Auto Answer” is set to “Reject,” the unit
rejects any incoming calls.
Answering a waiting call
If your cellular phone is equipped with the call waiting
function, you can put the current call on hold and
answer the waiting call.
Press any button (except /control dial).
• To restore the on-hold call, press any button (except
/control dial) again.
• When you end one call, you can connect to the other.
When a SMS comes in....
If the cellular phone is compatible with SMS (Short
Message Service) and “MSG Notice” is set to “On”
(see page 37), the unit rings and “Received Message”
appears on the display to inform you of the message
arrival.
• You cannot edit or send a message through the unit.
Continued on the next page
How to enter phone number
How to delete phone number
1
2 Select “Call.”
3 Display the list of phone numbers using one
of the dialing method (see step 3 of “Making
a call” on page 18).
4 Select the name/phone number you want to
delete.
5 Delete the selection.
• Press number button 6 ( ) to delete all
the listed numbers in step 3.
Select a number.
Move the entry position.
Confirm the entry.
EN16-23_KD-BT22[E]_003A_5.indd 19EN16-23_KD-BT22[E]_003A_5.indd 19 1/2/08 2:54:19 PM1/2/08 2:54:19 PM
To Next Page
Loading...
Need help?
General
