20
ENGLISH
Indications Selectable settings, [reference page]
DEMO MODE
Display demonstration
DEMO ON: [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [8].
DEMO OFF: Cancels.
CLOCK HOUR
Hour adjustment
1 – 12, [8]
[Initial: 1 (1:00)]
CLOCK MINUTE
Minute adjustment
00 – 59, [8]
[Initial: 00 (1:00)]
CLOCK DISP
Clock display
CLK DISP ON: [Initial]; Clock display is shown on the lower part
of the display.
CLK DISP OFF: Current source indication (ex. station band, disc
number, etc.) is shown on the lower part of the
display.
• Pressing DISP repeatedly will show the other information for about
5 seconds.
General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed (except for SID) in the table that
follows.
1
2 Select a PSM item.
Ex.: When you select “DIMMER MODE”
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5 Finish the procedure.
To Next Page
Loading...
