JVC KD-AVX77 - Media File and USB Troubleshooting; File Playback and USB Device Issues; Bluetooth Device Detection and Pairing Problems

• Elapsed playing time is not correct.
o Tracks are not played back as you
have intended them to play.
The track is unplayable.
This sometimes occurs during playback. This is caused by how the
tracks are recorded .
Playback order may differ from the one played back using other
players.
o Change the disc.
o Record the tracks using a compliant application on the
appropriate discs. (~4)
o Add appropriate extension codes to the file names.
The track played back is not a playable file format. Skip to another
file.
o "Not Support" appears on the screen
and track skips.
\..I
I
:E • Noise is generated.
~
Q.
~
~
.....
Q.
~
-
~
.....
Q.
:E
o Noise is generated. The track played back is not a playable file format. Skip to another
file.
o Tracks cannot play back as you have
intended them to play.
Playback order may differ from the one played back using other
players.
o "Now Reading ... " keeps flashing on
-=
VI the screen.
=
• Readout time varies depending on the USB device.
• Do not use too many hierarchy and folders.
o Turn off the power and on again.
• Correct characters are not displayed
(e.g. album name).
For available characters, ~ 62.
• While playing a track, sound is
sometimes interrupted.
The tracks are not properly copied into the USB device. Copy
tracks again, and try again.
• Bluetooth device does not detect the
unit.
.c
1;
o 0 The unit does not make pairing with
i the Bluetooth device.
;;
• Search from the Bluetooth device again.
• Reset the unit. While "Open ... " is shown on the screen, search
from the Bluetooth device again .
o Enter the same PIN code for both the unit and target device. If
the PIN code ofthe device is not indicated on its instructions,
try "0000" or "1234."
• Echo or noise occurs. Adjust the microphone position.
REFERENCES
Continued on the next page
67