.
Searching for a station
A
Select <FM> or <AM>.
B
Auto search. (Press)
Manual search. (Hold)
“M” flashes, then press the button repeatedly.
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Storing stations in memory
Manual presetting (FM/AM)
You can preset up to 18 stations for FM and 6
stations for AM.
While listening to a station...
.
“PRESET MODE” flashes.
1
.
The preset number flashes and “MEMORY”
appears.
2
Select preset number.
Auto presetting (FM only)
SSM (Strong-station Sequential
Memory)
You can preset up to 18 stations for FM.
.
1
B<TUNER>
B<SSM>
B<SSM 01 – 06>
.
“SSM” flashes. When all the stations are stored,
“SSM” stops flashing.
2
To preset <SSM 07 – 12>/<SSM 13 – 18>,
repeat steps 1 and 2.
Selecting a preset station
.
Improving the FM reception
.
1
B<TUNER>
B<MONO>
B<MONO ON>
.
0
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
2
Changing the display information
.
(for non-Radio Data System station)
Frequency 1 Clock
(for FM Radio Data System station)
Station name (PS) B Frequency B Programme
type (PTY) B Clock B (back to the beginning)
Listening to the radio
Listening to the radio
6
| ENGLISH
To Next Page
Loading...
Need help?
General
