JVC KD-G240 User Manual

Reset the unit.
Insert a playable disc into the loading slot.
Insert the disc correctly.
This unit can only display alphabets (upper case), numbers. and a
limited number 01 symbols.
• Use a disc with MP3IWMA tracks recorded in a lormat compliant
with ISO 9660 Level1,Level2, Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to the file names.
Store stations manually.
• Stop playback while driving on rough roads.
• (hange the disc.
• (heck the cords and connections.
This sometimes occurs during playback. This is caused by how the
tracks are recorded on the disc.
• Insert a finalized CD-RlCD-RW.
• Finalize the CD-RlCD-RW with the component which you used
lor recording.
Unlock the disc
• Eject the discforcibly.
(onnect the antenna firmly_
• Tracks are not played back in the order you Playback order is determined when the files are recorded.
have intended.
• The elapsed playing time is not correct.
• The correct characters are not displayed
(e.g. album name).
• Noise is generated. Skip to another track or change the disc. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 orWMA tracks.)
• A longer readout time is required Do not use too many hierarchical levels and lolders.
("READING" keeps flashing on the display).
• SSM automatic presening does not work.
• "NO DISC" appears on the display.
• "PLEASE" and "EJEa" appear altemately
on the display.
• CD-RlCD-RW cannot be played back.
• Tracks on the CD-RlCD-RW cannot be
skipped.
• Disc ejects.
• This unit does not work at all.
• Disc cannot be played back.
• Static noise while listening to the radio.
~ • Disc can be neither played back nor ejected.
i
...
~ • Disc sound is sometimes interrupted.
• Sound cannot be heard from the speakers. • Adjust the voiume to the optimum level.
• (heck the cords and connections.
$
iii . The bunons on the unit do not work as you II you press M MODE, some bunons work differently lrom it
'" intended. original lunction. Wait lor 5 seconds or press M MOOE again.
Symptoms
• Microsoft and Windows Media are either registered trademarks or trademarks 01 Microsoft Corporation in the United
States and/or other countries.
TROUBLESiiOoTlNG
0' If the power supply is not interrupted by turning off the ignition key of your cor, it is recommended thot you select "OFF" to
sove the cor's bottery.
0' O~ployedonlywhen "UOMOOE"issetto "WOOFER_"
0' The volume level outomoticolly chonges to "'IOL 30" if you chonge to "LOW PWR" while the volume level isset higher thon
"'10130."
• General settings-PSM
r'···'-· ,r'"~~-
IIJAdjust.
•
9 Finish
8EL • 0
• ~}TUm]
m
c:E:J [Hold] •
c::=.J
Indication Item ( : Initial) Setting
DEMO
• DEMOON
The display demonstration will be activated automatically il no operation is
done lor about 20 seconds.
• DEMO OFF
(ancels.
CLK DISpo,
• ON
The dock time is shown on the display at all times when the power is tumed
• OFF
off .
:
Cancels; pressing DISP will show the clock time lor about 5 seconds when the
power is turned off.
CLOCK H (Hour)
1-12 [Initial: 1 (1:00)J
CLOCK M (Minute) 00-59 [Initial: 00 (1:00)]
DIMMER
• ON
Dims the display and bunon illumination.
• OFF
(ancels.
SCROLL
• ONCE
Scrolls the displayed inlonmation once.
• AUTO
Repeats scrolling (at5-second intervals).
• OFF
(ancels.
• Pressing DlSP lor more than one second can scroll the display regardless 01
the sening.
VOMODE
• MAl!
Select il the REAR LINE OUT terminals are used lor connecting the speakers
(through an external amplifier).
• WOOFER
Select il the REAR LINE OUT terminals are used lor connecting a subwooler.
WOOFER*'
• LOW
Frequencies lower than 90 Hz are sent to the subwooler.
• MID
Frequencies lowerthan 135 Hz are sent to the subwooler.
• HIGH
Frequencies lower than 180 Hz are sent to the subwooler.
AUXADJ A.ADJOO Adjust the auxiliary input level to avoid the sudden increase olthe output
-A.ADJOS
level when changing the source from external component connected to the
AUX input jack on the control panel.
TAG DISP
• TAGON
Shows the tag while playing MP3IWMA tracks.
(lor KO-G24O)
• TAGOFF
(ancels.
AMPGAIN°'
• LOWPWR
VOL 00 - VOL 30 (Select ilthe maximum power 01 each speaker is less than
50 W to prevent the speaker from being damaged.)
• HIGHPWR
VOL 00 - VOL 50
AREA
• AREA US
When using in North/(entral/South America. AWFM intervals are set to
10 kHz/200 kHz.
• AREAEU
When using in any other areas. AWFM intervals are set to 9 kHz/50 kHz
(l00 kHz during auto search).
• AREASA
When using in South American countries. AM/FM intervals are set to 10 kHz/
100kHz.
SPECIFICATIONS ~
• Audio amplifier section
II a kit is necessary lor your car, consult your telephone
directory lor the nearest car audio speciality shop.
• General
Power Requirement Operating Voltage: D( 14.4 V
(11 V to 16 V allowance)
Grounding System: Negative ground
Allowable Operating Temperature:
0°Cl0 +4O°C (32°F to 1041')
Dimensions (W x Hx D):
Installation Size (approx.):
182 mm x 52 mm x 160 mm
(7-3/16" x 2-1/16" x 6-5/16")
Panel Size (approx.):
188mm x58 mm x 5 mm
(7-7/16" x 1-5/16" x 1/4")
Mass (approx.):
1.3 kg (2.9 ibs) (excluding accessories)
Design ond specifications are subject to chonge without
notice.
Having TROUBLE with operation?
Please reset your unn
Still having trouble??
Call 1-800-252-5722 (USA ONLY)
hllp://WWW.jvc.com
• CD player section
Type: Compact disc player
5ignal Detection 5ystem: Non-contact optical pickup
(semiconductor laser)
Number 01 channels: 1 channels (stereo)
Frequency Response: 5 Hz to 10 000 Hz
Dynamic Range: 93 dB
Signal-to-Noise Ratio: 98 dB
Wow and Flutter: less than measurable limit
MPl Decoding Format (lor KD-G24O):
MPEGll2 Audio layer 3
Max. Bit Rate: 320 kbps
WMA (Windows MediaS Audio) Decoding Fonmat
(lor KD-G14O): Max. Bit Rate: 191 kbps
[FMTunerl
Usable SensitiVity: 11.3 dBI (1.0 ~V175 0)
50 dB Quieting SensitiVity: 16.3 dBI (l.8 ~V /75 0)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 ODO Hz
Stereo Separation: 35 dB
[AM Tunerl
Sensitivity/Selectivity: 10 ~V/35 dB
• Tuner section
Frequency Range:
FM: 87.5 MHz to 107.9 MHz
(with channel interval set to 100 kHz or 200 kHz)
87.5 MHz to 108,0 MHz
(with channel interval set to 50 kHz)
AM: 530 kHz to 1710 kHz
(with channel interval set to 10 kHz)
531 kHz to 1 602 kHz
(with channel interval set to 9 kHz)
•
,-~.,
o ~
",.it"
Power Output:
20 W RM5 x 4 (hannels at 40 and
,;; 1% THD+N
Signal to Noise Ratio:
80 dBA (relerence: 1W into 4 0)
Load Impedance:
Tone (ontrol Range:
40(40to 8o allowance)
Bass: ±12dBat60Hz
Mid-range: ±12 dB at 1 kHz
Treble: ±12dBat7.5kHz
Frequency Response: 40 Hz to 10 ODO Hz
line-Dut Level/Impedance: 1.5 V/I0 kO load (lull scale)
Output Impedance: 1 kO
Subwooler-Out Level/Impedance:
2.5 VIlO kO load (full scale)
PREPARATION
This untt ~ designed 10 operate on 12JI DC..NEGATM ..... tIedrIcaI
syst __ 1f yourwllide does not wth~ system, a voltage inverter ~ required,
which can be purdlased atNC car al;Jdio iIea~.
WARNINGS
TROUBLESHOOTING'"

JVC KD-G240 Specifications

General

Brand	JVC
Model	KD-G240
Category	Car Receiver
Language	English