JVC KD-G255 User Manual (English)

Other manuals for JVC KD-G255

Questions and Answers:

W
williamsstephanieAug 1, 2025
How to fix JVC KD-G255 when no sound is coming from the speakers?
- W
  watsontiffanyAug 1, 2025
  If you cannot hear any sound from the speakers of your JVC Car Receiver, there might be several reasons. First, check if the volume level is set to the minimum; if it is, adjust it to a more audible level. Also, verify that all connections are correctly and firmly in place. Finally, if the built-in microcomputer has malfunctioned, reset the unit by holding the SEL button and pressing the standby/on attenuator button for more than 2 seconds. Note that resetting the unit will erase your preset adjustments.
J
Jennifer VasquezAug 7, 2025
What to do if JVC KD-G255 Car Receiver says 'NO DISC'?
- S
  Scott RogersAug 7, 2025
  If your JVC Car Receiver displays “NO DISC”, it means that there is no disc in the magazine. Insert discs correctly into the magazine, ensuring that they contain MP3 files. Also, this issue might appear if the unit is not correctly connected to the CD changer. To resolve this, ensure that the unit and the CD changer are properly connected, then press the reset button on the CD changer.
A
Amy SmithAug 16, 2025
What to do if JVC KD-G255 CD playback isn't working?
- J
  Jessica BrowningAug 16, 2025
  If your JVC Car Receiver is not playing CDs, there are several potential reasons. First, make sure the CD is inserted correctly, with the correct side facing down. If you are using a CD-R or CD-RW, ensure that it has been finalized; if not, finalize it using the component you used for recording. Check if the CD is locked and, if so, unlock it. The CD player might have malfunctioned; in this case, hold the standby/on attenuator button and press the eject button for more than 2 seconds to reset it. Avoid playback on rough roads, as this can interfere with playback. A scratched CD can also cause issues, so try a different CD. Also, check the cords and connections. If there is no CD in the loading slot, insert one.
M
Mark BlanchardAug 23, 2025
Why is SSM automatic preset not working on my JVC KD-G255?
- D
  Dustin TorresAug 23, 2025
  If the SSM (Strong-station Sequential Memory) automatic preset is not working on your JVC Car Receiver, it could be due to weak signals. In this case, try storing stations manually. Another possible cause is that the antenna is not firmly connected. Ensure the antenna is securely connected.