26
ENGLISH
Symptoms Remedies/Causes
iPod playback
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• Update the firmware version.
•
Change the battery.
• Buttons do not work as intended. The functions of the buttons have been changed. Press
M MODE before performing the operation.
• The sound is distorted. Deactivate the equalizer either on the unit or the iPod.
• “NO IPOD” appears on the display.
Check the connecting cable and its connection.
• Playback stops. The headphones are disconnected during playback.
Restart the playback operation using the control panel
(see page 16).
• No sound can be heard when connecting an
iPod nano.
Disconnect the headphones from the iPod nano.
• “NO FILES” appears on the display.
No tracks are stored. Import tracks to the iPod.
• “RESET 1” – “RESET 7” appears on the
display.
Disconnect the adapter from both the unit and iPod.
Then, connect it again.
• “RESET 8” appears on the display.
Check the connection between the adapter and this unit.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
EN14-27_KD-G431_003C_fff.indd 26EN14-27_KD-G431_003C_fff.indd 26 3/13/08 12:03:11 PM3/13/08 12:03:11 PM
To Next Page
Loading...
Need help?
General
