JVC KD-G541 - iPod Operations and Control; iPod Connection and Preparation; Basic iPod Playback Controls; Navigating iPod Menus

22
ENGLISH
iPod operations
This unit is ready for operating an Apple iPod.
Before operating, connect the Interface adapter
for iPod, KS-PD100 (separately purchased) to the CD
changer jack on the rear of the unit.
• For connection, see Installation/Connection Manual
(separate volume).
• For details, refer also to the manual supplied with the
interface adapter.
Preparations:
Make sure “CHANGER” is selected for the external input
setting, see page 15.
~
Playback starts automatically from where it has
been paused previously.
Ÿ Adjust the volume.
! Adjust the sound as you want. (See
pages 12 and 13.)
• Make sure the equalizer on the iPod is
deactivated.
Pause playback
• To resume playback, press
the button again.
Fast-forward or reverse the
track
Forward skip/reverse skip
Selecting a track from the menu
1 Enter the main menu.
Now the
5/∞/4 /¢ buttons work
as the menu selecting buttons*.
* The menu selecting mode will be canceled:
– If no operations are done for about 5 seconds.
– When you confirm the selection of a track.
2 Select the desired menu.
PLAYLIST Ô ARTISTS Ô ALBUMS Ô
SONGS Ô GENRES Ô COMPOSER Ô
(back to the beginning)
3 Confirm the selection.
• To move back to the previous menu, press 5.
• If a track is selected, playback starts
automatically.
• If the selected item has another layer, you will
enter the layer. Repeat steps 2 and 3 until the
desired track is played.
• Holding 4 /¢ can skip 10 items at
a time.
EN22-29_KD-G541_003A_f.indd 22EN22-29_KD-G541_003A_f.indd 22 11/13/07 2:30:02 PM11/13/07 2:30:02 PM