ENGLISH
9OPERATIONS
When receiving HD Radio
multicast channels...
Select your desired channel.
• “LINKING” appears while linking to a multicast
channel.
Searching for HD Radio stations
only
When a station is tuned in, searching stops.
Selected frequency
Lights up when a digital audio is broadcast.
Flashes when an analog audio is broadcast.
Station Call Sign
Channel number
1
Select “FM” or “AM.”
2
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for a station manually—Manual Search.
Hold either one of the buttons until “M” flashes on the display, then press it
repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST indicator
lights up on the display.
Ex.: When receiving a conventional FM
station
Ex.: When receiving an HD Radio station
[Hold]
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
1 Call up the SET menu.
2 Select “TUNER.”
3 Select “MONO.”
4 Select “MONO ON.”
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure to select “MONO OFF.”
[Hold]
[Turn] = [Press]
[Turn] = [Press]
[Turn] = [Press]
To Next Page
Loading...
Need help?
General
