JVC KD-HDR71BT Instruction Manual

Making a call from memory
You can store up to 6 contacts in the memory of
this unit for speed dialing.
To store contacts in memory
1
Enter the “Hands-Free” menu.
-<DIALED>/
<RECEIVED>/
<MISSED CALL>/
<PHONEBOOK>/
<DIAL NUMBER>
2
Select a call method.
3
Select a contact (name/phone number).
Phone Number
or
Name
(Hold)
“MEMORY PX” flashes. The contact is stored to the
selected number button (1 - 6).

To erase a contact from preset memory, select
<DIAL NUMBER> in step 2 and store a blank
number.
4
Store in memory.
To make a call from memory
1
Enter the “Hands-Free” menu.

“NO PRESET” appears if there are no contacts
stored in memory.
2
Select and call the contact.
Using voice recognition
You can use the voice recognition features of the
connected phone through this unit.

“NOT SUPPORT” appears if the connected
phone does not support this feature.
If only one phone is connected,
(Hold)
1
Enter voice recognition mode.
If two phones are connected,
(Hold)
Select the desired phone
Enter “phone list”
2
When “WAIT VOICE”#“[Device Name]”
scrolls on the display, speak the name of
the contact you want to call or the voice
command to control the phone functions.
Supported voice recognition features vary for
each phone. Please refer to the instruction
manual of the connected phone for details.
Deleting a contact (name/
phone number)
Only when <P.BOOK SEL> is set to <P.BOOK IN
UNIT>. (' page 19)
1
Enter the “Hands-Free” menu.
-<DIALED>/
<RECEIVED>/
<MISSED CALL>/
<PHONEBOOK>
2
Select a call method.
3
Select the contact (name/phone number)
to be deleted.
Phone Number
or
Name
(Hold)
4
Enter “Delete Entries” menu.
DELETE Selected name/phone number
from step 3 is deleted.
DELETE
ALL
All name/phone numbers from
selected menu in step 2 are
deleted.
5
Select <DELETE> or <DELETE ALL>.
Bluetooth mobile phone
18
|ޓENGLISH
2011/12/17ޓ14:6:9KD-AHD75_J_EN

JVC KD-HDR71BT Specifications

General

Brand	JVC
Model	KD-HDR71BT
Category	Car Receiver
Language	English