To Next PageTo Next PageWhy is there no sound from my JVC KD-LX3R speakers?
If you can't hear any sound from the speakers of your JVC Car Receiver, there might be a couple of reasons. First, check if the volume level is set too low and adjust it to a suitable level. Also, verify that all the cords and connections are correctly connected.
What to do if my JVC KD-LX3R Car Receiver CD cannot be played back?
If your JVC Car Receiver isn't playing CDs, consider these possible causes: the CD may be inserted upside down (insert it correctly), you might be driving on a rough road (stop CD play while doing so), the CD could be scratched (try another CD), or the connections might be incorrect (check the cords and connections).
What to do if my JVC Car Receiver does not work at all?
If your JVC Car Receiver and CD changer are completely unresponsive, it could be due to a microcomputer malfunction caused by interference. Press the reset button on the front panel.
What does “RESET 8” mean on the display of my JVC Car Receiver?
If “RESET 8” is displayed on your JVC Car Receiver, it indicates that the unit is not correctly connected to the CD changer. Ensure that the unit and the CD changer are properly connected, and then press the reset button on the CD changer.
Why does my JVC Car Receiver have static noise while listening to the radio?
If you are experiencing static noise while listening to the radio on your JVC Car Receiver, it is possible that the antenna is not firmly connected. Make sure the antenna is properly connected.
General| Brand | JVC |
|---|---|
| Model | KD-LX3R |
| Category | Car Receiver |
| Language | English |
