ENGLISH
7OPERATIONS
When an FM stereo broadcast is
hard to receive
1
2
Reception improves, but stereo effect will be lost.
• lights up on the display.
3 Exit from the setting.
Listening to the radio
1
Select “TUNER.”
2
Select the bands.
3
Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” lights up on the display, then
press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength,
lights up
on the display.
FM station automatic presetting
— SSM (Strong-station Sequential
Memory)
You can preset up to six stations for each band.
1 While listening to a station...
2
3
Local FM stations with the strongest signals are
searched and stored automatically in the selected
FM band.
Continued on the next page
• While listening to an iPod (in menu selecting
mode):
Connected to KS-PD100:
– Selects an item if pressed briefly. (Then, press
D
∞ to confirm the selection.)
– Skips 10 items at a time if pressed and held.
Connected to the USB input jack:
– Start play back the selected folder directly if
pressed and held.
• Reverse skip/forward skip for Bluetooth audio.
EN02-07_PDR61_003A_4.indd 7EN02-07_PDR61_003A_4.indd 7 12/31/07 11:09:37 AM12/31/07 11:09:37 AM
To Next Page
Loading...
Need help?
General
