ENGLISH
4
Basic operations
Using the control panel
p Detach the panel.
q Change the display information.
w • FM/AM: Search for station.
• CD/USB: Select track.
e Return to the previous menu.
r Remote sensor
t AUX (auxiliary) input jack
y USB (Universal Serial Bus) input jack
*
1
Also known as “Control dial” in this manual.
*
2
You cannot select these sources if they were disabled
in the Menu (see “SRC SELECT” in “Menu
operations” on page 16).
*
3
You cannot select “CD” as the playback source if no
disc is in the unit.
*
4
You can still adjust the volume during pause when
the selected source is CD/USB.
Before resume playback, check to be sure that you
have not raise the volume level too much.
1 • FM/AM: Select preset station.
• CD/USB: Select folder.
2 • Turn on the power.
• Attenuate the sound (if the power is on).
• Turn off the power [Hold].
3 Select the source.
FM = AM *
2
= CD *
3
= USB = AUX IN *
2
=
(back to the beginning)
4 • Enter list operations.
• Enter Menu setting [Hold] .
5 • Control the volume *
4
or select items [Turn].
• Confirm the selection [Press] .
• FM: Enter SSM preset mode [Hold] .
• CD/USB: Enter playback mode [Hold] .
Pause/resume playback *
4
[Press] .
6 Loading slot
7 Display window
8 Eject disc.
9 Select the sound mode.
EN02-09_KD-R506_001A_f.indd 4EN02-09_KD-R506_001A_f.indd 4 9/10/08 4:20:04 PM9/10/08 4:20:04 PM
To Next Page
Loading...
