JVC KD-R618

Changing the Bluetooth settings
IIf1~
q "BT-PHONE" or "BT-AUDIO"
2
q Bluetooth menu
Setting menu [Initial: Underlined]
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with,.. •
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth
device found
at first.
q "SETIINGS"
q Select asetting item.
AUTO CNNCT'" AUTO ANSWER*l
... MSG INFO*2 MIC SETIING*l
... VERSION*3 (back to the
beginning)
----''---------
MIC SETIING (microphone setting)
Only for the device being connected for
"BT-PHONE." Adjust microphone volume
connected to the Bluetooth
adapter,
[LEVEL 01/02/03].
MSG INFO (message info)
Only for the device being connected for
"BT-PHONE."
AUTOMATIC: The unit informs you ofthe
arrival ofa message by ringing
and displaying "RCV MESSAGE"
(receiving message).
• The display illuminate in blue.
«RING COLOR>, ~ 26)
MANUAL: The unit does not inform you of
the
arrival ofa message.
AUTO ANSWER
Only for the device being connected for
"BT-PHONE."
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls
manually.
REJECT: The unit rejects all incoming calls .
5
4
3
q Change the setting accordingly, For
_~~tting menu, e.t.l ri9ht column_, _
*1 Appears only when a Bluetooth phone is
connected.
*2 Appears only when a Bluetooth phone is
connected and it is compatible with text
message (notified through JVC Bluetooth
adapter).
*3 Bluetooth Audio: Shows only "Version."
VERSION
The Bluetooth software and hardware versions
are shown.
~?
ENGLISH 1 15