ENGLISH
42
Symptoms Remedies/Causes
CD changer
• “No Disc” appears on the display. Insert a disc into the magazine.
• “No Magazine” appears on the display. Insert the magazine.
• “Reset 08” appears on the display. Connect this unit and the CD changer correctly and
press the reset button of the CD changer.
• “Reset 01” – “Reset 07” appears on the
display.
Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 3).
iPod/iPhone
• The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version of the iPod/iPhone.
• Charge the battery of the iPod/iPhone.
• Reset the iPod/iPhone.
• Check whether <iPod Switch> setting is
appropriate (see page 29).
• The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
• Playback stops. The headphones are disconnected during playback.
Restart the playback operation.
• “Cannot Play” appears on the display. No tracks are stored. Import tracks to the iPod.
• “Restricted” appears on the display. Check whether the connected iPod/iPhone is
compatible with this unit (see page 37).
Only when connecting with the interface
adapter
• “No Files” appears on the display. No tracks are stored. Import tracks to the iPod.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
• “Disconnect” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• No sound can be heard when
connecting an iPod nano.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
• “Reset 01” – “Reset 07” appears on
the display.
Disconnect the adapter from both this unit and iPod.
Then, connect it again.
• “Reset 08” appears on the display. Check the connection between the adapter and this
unit.
EN40-45_KD-R905_001A_2.indd 42EN40-45_KD-R905_001A_2.indd 42 1/22/09 3:04:36 PM1/22/09 3:04:36 PM
To Next Page
Loading...
Need help?
General
