J
Jason BergerSep 2, 2025
How to stop noise generated on JVC Car Receiver?
- SSamantha CookSep 2, 2025
If noise is generated on your JVC Car Receiver, skip to another track or change the disc.
To Next PageTo Next PageHow to stop noise generated on JVC Car Receiver?
If noise is generated on your JVC Car Receiver, skip to another track or change the disc.
Why 'Not Support' appears and track skips on JVC KD-R921BTEY?
If “Not Support” appears on the display and the track skips on your JVC Car Receiver, skip to the next track encoded in an appropriate format or to the next non-copy-protected WMA track.
What does 'Connection Error' mean on JVC Car Receiver?
If “Connection Error” appears on the display of your JVC Car Receiver, it means the device is registered but the connection has failed. Use to connect the device again.
What does 'Please Connect BT Adapter' mean on JVC Car Receiver?
If “Please Connect BT Adapter” appears on the display of your JVC Car Receiver, connect the USB Bluetooth Adapter to the unit before you can perform any operation.
What does 'In Disc' mean on JVC KD-R921BTEY Car Receiver?
If “In Disc” appears on the display of your JVC Car Receiver, the disc cannot be ejected properly. Make sure nothing is blocking the loading slot.
Why JVC Car Receiver does not respond when copying the phonebook?
You may have tried to copy the same entries (as stored) to the unit. Press DISP or T/P BACK to exit.
What does 'Please Eject' mean on my JVC KD-R921BTEY Car Receiver?
If “Please Eject” appears on the display of your JVC Car Receiver, this can sometimes occur due to overheating. Eject the disc or change to another playback source.
What does it mean when 'Reading' keeps flashing on JVC KD-R921BTEY Car Receiver display?
If “Reading” keeps flashing on the display of your JVC Car Receiver, it means a longer readout time is required. Avoid using too many hierarchical levels and folders.
Why JVC KD-R921BTEY Car Receiver pairing cannot be made?
If you are unable to pair your device with the JVC Car Receiver, make sure you have entered the same PIN code on both the unit and the target device. If the problem persists, disconnect the Bluetooth device and try pairing again.
Why is my JVC KD-R921BTEY Car Receiver not detecting Bluetooth device?
If your JVC Car Receiver is not detecting any Bluetooth devices, try searching from the Bluetooth device again. If that doesn't work, reset the unit and then search from the Bluetooth device again.
General| Brand | JVC |
|---|---|
| Model | KD-R921BTEY |
| Category | Car Receiver |
| Language | English |
