JVC KD-R988BTS - Page 17

ENGLISH
13
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
TuneScan™
You can get a short preview of the songs that you have missed on each of
your SmartFavorites music channels or currently tuned music channel.
1 Press .
2 Press to select TUNE SCAN, then press .
Scanning start for the first 6 seconds of the recorded music contents.
• To listen to the current song, press
to stop scanning. The
unit continues playing the current song.
• To select the previous/next song, press
.
• To cancel scanning, press and hold
. Playback returns to the
channel before you entered TuneScan.
SiriusXM settings
1
Press and hold .
2 Press to select an item (see the following table), then
press
.
3 Repeat step 2 until the desired item is selected/activated or follow
the instructions stated on the selected item.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
SIRIUS XM
CHANNEL LOCK
To unlock settings:
1 Press to select a number.
2 Press to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press to confirm.
CODE SET 1 Press to enter [NEW CODE] .
2 Press to select a number.
3 Press to move to the entry position.
4 Repeat steps 2 and 3 to enter a new 4-digit pass code.
5 Press to confirm.
6 Repeat steps 2 to 5 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings
for next time.
LOCK SETTING MATURE CH :Selects the SiriusXM-defined lock setting.;
USER DEFINED :Selects the individual channels the user wants to
lock.;
OFF :Cancels.
CHANNEL EDIT
*
1
1 Press to select a category, then press
.
2 Press to select a channel you want to lock, then
press
.
“L” appears in front of the channel number.
3 Press and hold to exit.
CHANNEL CLEAR
*
1
YES :Clears all the locked channels.; NO :Cancels.
TUNE START
*
2
ON :All qualified music channels in the SmartFavorites will start
playback from the beginning of the song.;
OFF :Cancels.
SIGNAL LEVEL Shows the strength ( NO SIGNAL / WEAK / GOOD / STRONG ) of the
current received signal.
BUFFER USAGE Shows the memory usage ( 0% to 100% ) for Replay buffer.
SXM RESET YES :Resets stored channel and lock setting to default.; NO :Cancels.
*
1
Displayed only when [USER DEFINED] is selected.
*
2
Available only if the connected SiriusXM Vehicle Tuner is SXV200 or later that supports
SmartFavorites.
SiriusXM® Radio (for KD-R988BTS)
JS_JVC_KD_R988BTS_K_EN_5.indd 13JS_JVC_KD_R988BTS_K_EN_5.indd 13 9/1/2016 11:04:47 AM9/1/2016 11:04:47 AM