JVC KD-R992BT User Manual

ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED
For key layout on the faceplate, see page3 or page4.
Cancel the demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES] ), the display shows:
KD-R992BT / KD-R899BT / KD-R794BT / KD-R792BT :
“CANCEL DEMO”
“PRESS” “VOLUME KNOB”
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
KD-R891BT :
“CANCEL DEMO”
“PRESS ENTER”
1 Press .
[YES] is selected for the initial setup.
2 Press again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold .
2 Perform ‘select an item ( 3 or 4)’ operation to select [CLOCK] .
3 Perform ‘select an item ( 3 or 4)’ operation to adjust the clock.
[CLOCK ADJUST] set the hour and minute [CLOCK FORMAT]
[12H]
or [24H]
4 Perform ‘select an item ( 3 or 4)’ operation to set the date.
[DATE SET] set the day, month and year
5 Press to exit.
To return to the previous setting item, press .
1
Set the basic settings
1
Press and hold .
2 Perform 'select an item ( 3 or 4)’ operation to select an
item (see the following table).
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press .
Default:
XX
SYSTEM
KEY BEEP
(Not applicable when 3-way crossover is selected.)
ON :Activates the keypress tone.; OFF :Deactivates
SOURCE SELECT
AM SRC
*
ON :Enables AM in source selection.; OFF :Disables. ( 6)
SPOTIFY SRC
*
ON :Enables SPOTIFY in source selection.; OFF :Disables. ( 11)
BUILT-IN AUX
*
ON :Enables AUX in source selection.; OFF :Disables. ( 8)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
YES :Starts upgrading the firmware.; NO :Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
FACTORY RESET YES :Resets the settings to default (except the stored station).;
NO :Cancels.
*
Not displayed when the corresponding source is selected.
2
3
JS_JVC_KD_R992BT_E_EN_3.indd 5JS_JVC_KD_R992BT_E_EN_3.indd 5 7/27/2017 9:46:42 AM7/27/2017 9:46:42 AM

JVC KD-R992BT Specifications

General

DIN size	1 DIN
Output power	200 W
Product color	Black
Ready for iPod	Yes
Disc types supported	CD
Audio output channels	- channels
Equalizer bands quantity	13
Maximum power per channel	50 W
Audio formats supported	AAC, FLAC, MP3, WMA
USB version	2.0
Bluetooth version	3.0+HS
USB port position	Front
Bluetooth profiles	A2DP, AVRCP
Line outputs (RCA)	3
USB connector type	USB Type-A
USB ports quantity	1
Hands-free calling	Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
AM band range	531 - 1611 kHz
FM band range	87.5 - 108 MHz
LW band range	153 - 279 kHz
Supported radio bands	AM, FM
Preset stations quantity	24
Display type	LCD
Illumination color	White
Display number of lines	2 lines
Package weight	1700 g

Weight and Dimensions

Depth	158 mm
Width	182 mm
Height	53 mm
Weight	1200 g