ENGLISH
22
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5 Finish the procedure.
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 23.
1 Enter the PSM settings.
2 Select a PSM item.
General settings — PSM
Indications Item
( : Initial)
Setting, [reference page]
DEMO
Display
demonstration
• DEMO ON
• DEMO OFF
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [4].
: Cancels.
CLOCK DISP *
1
Clock display
• CLOCK ON
• CLOCK OFF
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [4].
CLOCK HOUR
Hour adjustment
1 – 12 [Initial: 1 (1:00)], [4].
CLOCK MIN
Minute adjustment
00 – 59 [Initial: 00 (1:00)], [4].
CLOCK ADJ *
2
Clock adjustment
• AUTO
• OFF
: The built-in clock is automatically adjusted using the clock data
provided via the satellite radio channel.
: Cancels.
TIME ZONE *
2,
*
3
Time zone
— : Select your residential area from one of the time zones for clock
adjustment.
EASTERN, ATLANTIC, NEWFOUND, ALASKA, PACIFIC, MOUNTAIN,
CENTRAL
DST *
2,
*
3
Daylight savings
time
• DST ON
• DST OFF
: Activates daylight savings time if your residential area is subject to
DST.
: Cancels.
EN20-29_KD-S25[J]_1.indd 22EN20-29_KD-S25[J]_1.indd 22 5/5/08 2:12:40 PM5/5/08 2:12:40 PM
To Next Page
Loading...
