17
ENGLISH
CD OPERATIONS
Elapsed playing time Current track
Total track number
of the inserted disc
Total playing time
of the inserted disc
The CD–in indicator lights up.
The CD–in indicator flashes.
Refer to “MP3 OPERATIONS” on pages 23 to 27
for operating MP3 discs.
Playing a CD
Insert a CD into the loading slot.
The unit turns on, draws
the CD and starts
playback automatically.
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing CD
turns on the unit and starts playback automatically.
All tracks will be played repeatedly until you stop
playback.
Note:
When a CD is inserted upside down, “EJECT” and
the CD–in indicator flash on the display and the CD
automatically ejects.
To stop play and eject the CD
Press 0.
CD play stops and the disc automatically ejects
from the loading slot. The source changes to the
tuner (you will hear the last received station.)
• If you change the source, CD play also stops
(without ejecting the disc).
Next time you select “CD” as the source, CD
play starts from where playback has been
stopped previously.
Notes:
• If the ejected disc is not removed for about
15 seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(Disc play will not start this time.)
• You can eject the disc even when the unit is turned
off.
• If the disc is a CD Text, disc title/performer and
then track title will automatically appear.
EN17-20KD-S891R[E_EX]f.p65 4/7/03, 9:41 AM17
To Next Page
Loading...
Need help?
General
