JVC KD-S891R

24
ENGLISH
To change the display information
While playing back an MP3 file, you can change
the MP3 disc information shown on the display.
Each time you press DISP
(display), the display changes to
show the following:
• When “TAG DISP” is set to “TAG ON”
(initial setting: see page 32)
* If an MP3 file does not have ID3 tags, folder
name and file name appear. In this case, the
TAG indicator will not light up on the display.
• When “TAG DISP” is set to “TAG OFF”
Note:
The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 32.
Album name / performer
(folder name*)
(TAG lights up on the display)
Track title (file name*)
(TAG lights up on the display)
Elapsed playing time and
Current file number
Clock and
Current file number
Folder name
( lights up on the display)
File name
( lights up on the display)
Elapsed playing time and
Current file number
Clock and
Current file number
EN21-27KD-S891R[E_EX]f.p65 4/7/03, 9:41 AM24