20
ENGLISH
Selecting the level display
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO 2” is
selected.
1
Press and hold SEL (select) for more
than 2 seconds.
“CLOCK H,” “CLOCK M,”
“LEVEL,” or “DIMMER*”
appears on the display.
* Only for KD-SC800
2
Select “LEVEL” if not shown on the
display.
3
Select the desired mode.
• AUDIO 1: Shows the audio level indicator.
• AUDIO 2: Alternates “AUDIO 1” setting
and illumination display.
• OFF: Erases the audio level indicator.
4
Finish the setting.
MEMO
You can use the space below to note your
favorite settings—preset stations, sound
modes, and others.
EN19-22_KD-SC800_S790[J]f.p65 12/9/02, 4:45 PM20
To Next Page
Loading...
