16
1
Call up the sound mode you want to adjust.
See page 14 for details.
2
To adjust the bass or treble sound level
Select “BAS” or “TRE.”
This is ONLY FOR KD-SX740.
To turn on or off the loudness function
Each time you press LOUD, the loudness
function turns on and off alternatively. (= go to step 4)
3
Adjust the bass or treble level.
See page 15 for details.
4
Press and hold SOUND until the sound mode
you have selected in step 1 flashes on the
display.
Your setting is stored in memory.
5
Repeat the same procedure to store other settings.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 14.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 14) to your preference and
store your own adjustments in memory.
SEL
Within
5 seconds
LOUD
SOUND
SOUND
Within
5 seconds
Within
5 seconds
SEL
2
1, 4
3
2
(ONLY FOR KD-SX740)
EN13-16.KD-SX840/SX740[J]/F 98.11.4, 11:25 AM16
To Next Page
Loading...
Need help?
General
