JVC KD-T752BT

ENGLISH
11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
You can listen to music from a portable audio player via the auxiliary input
jack.
Preparation:
Select
[ON] for [BUILT-IN AUX] in [SOURCESELECT] . (Page6)
Start listening
1
Connect a portable audio player (commercially available).
3.5 mm stereo mini plug with “L” shaped
connector (commercially available)
Portable audio player
Auxiliary input jack
2 Press B SRC repeatedly to select AUX.
3 Turn on the portable audio player and start playback.
Use a 3-core plug head stereo mini plug for optimum audio
output.
AUX JVC Remote Application
You can control the JVC car receiver from the following device using
JVC Remote application.
• KD-T952BT: iPhone/iPodtouch (via Bluetooth or via USB input terminal)
or Android device (via Bluetooth)
• KD-T752BT: Android device (via Bluetooth)
For more information, visit <https://www.jvc.net/cs/car/>.
Preparation:
Install the latest version of JVC Remote application on your device before
connecting.
Start using JVC Remote application
1
Start up the JVC Remote application on your device.
2 Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page13)
• For iPhone/iPodtouch:
Connect iPhone/iPodtouch to the USB input terminal. (Page9)
(or)
Pair the iPhone/iPodtouch with this unit via Bluetooth. (Page13)
(Make sure the USB input terminal is not connected to any device.)
3 Select the device to use from the menu.
See “Settings to use JVC Remote application” on page12.
For KD-T952BT: By default, [ANDROID] is selected. To use iPhone/
iPodtouch, select [YES] for [IOS] .
KD_T952BT_M_B5A-3835-00_EN_4th Draft.indd 11KD_T952BT_M_B5A-3835-00_EN_4th Draft.indd 11 5/7/2021 4:25:37 PM5/7/2021 4:25:37 PM