JVC KD-X125 - Radio Operation and Tuning; Tuning Radio Stations; Storing and Selecting Preset Stations

ENGLISH
7
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
RADIO
Supported band:
For
KD-X220 : FM / AM
For
KD-X125 / KD-X120 : FM / FM-LO / AM
“ST” lights up when receiving an FM stereo broadcast with sufficient
signal strength.
Search for a station
1
Press repeatedly to select band.
2 Press to search for a station automatically.
(or)
Press and hold until “M” flashes, then press repeatedly to
search for a station manually.
Settings in memory
You can store up to 12 stations for FM, 6 stations for FM-LO and 6 stations
for AM.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the
knob.
The preset number flashes and “MEMORY” appears.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press
2 Turn the volume knob to select a preset number, then press the
knob to confirm.
Other settings
1
Press and hold .
2 Turn the volume knob to select [ TUNER ], then press the knob.
3 Turn the volume knob to make a selection ( 8) , then press the
knob.
4 Repeat step 3 until the desired item is selected/activated or follow
the instructions stated on the selected item.
5 Press to exit.
To return to the previous setting item, press .
JS_JVC_KD_X220_E_EE_EN_3.indd 7JS_JVC_KD_X220_E_EE_EN_3.indd 7 18/9/2014 10:23:49 AM18/9/2014 10:23:49 AM