JVC KD-X176 User Manual

ENGLISH
11
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
[PRO EQ] Adjusts your own sound settings for each source.
• The settings are stored to [USER] in [PRESET EQ].
• The settings made may affect the current settings of [EASYEQ].
1 [BASS]/[MIDDLE]/[TREBLE]: Select a sound tone.
2 Adjust the sound elements of the selected sound tone.
[BASS] Frequency : [60HZ]/[80HZ]/[100HZ]/[200HZ]
Level : [LVL–06] to [LVL+06]
Q : [Q1.0]/[Q1.25]/[Q1.5]/[Q2.0]
(Default : [80HZ]/[LVL00]/[Q1.0])
[MIDDLE] Frequency : [0.5KHZ]/[1.0KHZ]/[1.5KHZ]/[2.5KHZ]
Level : [LVL–06] to [LVL+06]
Q : [Q0.75]/[Q1.0]/[Q1.25]
(Default : [1.0KHZ]/[LVL00]/[Q1.25])
[TREBLE] Frequency : [10.0KHZ]/[12.5KHZ]/[15.0KHZ]/[17.5KHZ]
Level : [LVL–06] to [LVL+06]
Q : [QFIX]
(Default : [10.0KHZ]/[LVL00]/[QFIX])
[AUDIO CONTROL]
[BASS BOOST]
[LEVEL+01] to [LEVEL+05] ([LEVEL+01]): Selects your preferred bass
boost level. ; [OFF]: Cancels.
[LOUDNESS]
[LEVEL01]/[LEVEL02]: Boosts low or high frequencies to produce a well-
balanced sound at low volume. ; [OFF]: Cancels.
[SUB.W
LEVEL]*1
[SPK-OUT]*2
[SUB.W00] to [SUB.W+06] ([SUB.W+03]): Adjusts the
output level of the subwoofer connected via speaker lead.
(Page 12)
[PRE-OUT]*3
[SUB.W–08] to [SUB.W+08] ([SUB.W00]): Adjusts
the output level of the subwoofer connected to the lineout
terminals (REAR/SW) through an external amplifier.
(Page 12)
Audio Settings
[SUBWOOFER
SET]*3
[ON]: Turns on the subwoofer output. ; [OFF]: Cancels.
[SUBWOOFER
LPF]*1
[FRQ THROUGH]: All signals are sent to the subwoofer. ;
[FRQ55HZ]/[FRQ85HZ]/[FRQ120HZ]: Audio signals with frequencies lower
than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
[SUB.W
PHASE]*1*4
[REVERSE] (180°)/[NORMAL] (0°): Selects the phase of the subwoofer output
to be in line with the speaker output for optimum performance.
[FADER]
[POSITIONR06] to [POSITIONF06] ([POSITION00]): Adjusts the front and
rear speaker output balance.
[BALANCE]*5
[POSITIONL06] to [POSITIONR06] ([POSITION00]): Adjusts the left and
right speaker output balance.
[VOLUME
ADJUST]
[LEVEL–15] to [LEVEL+06] ([LEVEL 00]): Presets the initial volume level of
each source by comparing to the FM volume level. (Before adjustment, select
the source you want to adjust. “VOL ADJ FIX” appears if FM is selected.)
[AMPGAIN]
[LOWPOWER]: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging the
speakers.) ; [HIGHPOWER]: The maximum volume level is 35.
[D.T.EXPANDER]
(Digital Track
Expander)
[ON]: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in audio
data compression. ; [OFF]: Cancels.
[SPK/PREOUT] Depending on the speaker connection method, select the appropriate setting
for the desired output. (See “Speaker output settings” on page 12.)
*1 Displayed only when [SUBWOOFER SET] is set to [ON].
*2 Displayed only when [SPK/PREOUT] is set to [SUB.W/SUB.W]. (Page 12)
*3 Displayed only when [SPK/PREOUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W].
(Page 12)
*4 Selectable only if a setting other than [FRQTHROUGH] is selected for [SUBWOOFERLPF].
*5 This adjustment will not affect the subwoofer output.
JS_JVC_KD_X176_E_EN_int1.indd 11JS_JVC_KD_X176_E_EN_int1.indd 11 4/22/2019 10:14:35 AM4/22/2019 10:14:35 AM

JVC KD-X176 Specifications

General

Brand	JVC
Model	KD-X176
Category	Receiver
Language	English