EasyManuals Logo
Home>JVC>Receiver>KD-X272BT

JVC KD-X272BT User Manual

JVC KD-X272BT
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Getting Started
Cancel the demonstration
When you turn on the power for the first time (or
[FACTORY RESET]
is set to
[YES]
, see page6), the display shows: “CANCEL DEMO” “PRESS”
“VOLUME KNOB”
1 Press the volume knob.
[YES]
is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock and date
1
Press and hold .
2 Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3 Turn the volume knob to select
[CLOCKADJUST]
, then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Set the time in the order of “Hour” “Minute”.
5 Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6 Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
To set the date
7 Turn the volume knob to select
[DATESET]
, then press the knob.
8 Turn the volume knob to make the settings, then press the knob.
Set the date in the order of “Day” “Month” “Year”.
1
2
9 Press to exit.
To return to the previous setting item, press
.
Set the basic settings
1
Press and hold .
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press to exit.
To return to the previous setting item, press
.
Default: [XX]
[SYSTEM]
[KEY BEEP]
(Not applicable when 3-way crossover is selected.)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[SOURCE SELECT]
[AM SRC]*
[ON]: Enables AM in source selection. ; [OFF]: Disables. (Page 6)
[SPOTIFY SRC]*
[ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables.
(Page 10)
[BTAUDIO SRC]*
[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables.
(Page 18)
[BUILT-IN AUX]*
[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 10)
* Not displayed when the corresponding source is selected.
3
JS_JVC_KD_X372BT_E_EN_6th.indd 5JS_JVC_KD_X372BT_E_EN_6th.indd 5 18/7/2019 9:46:31 AM18/7/2019 9:46:31 AM

Table of Contents

Other manuals for JVC KD-X272BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JVC KD-X272BT and is the answer not in the manual?

JVC KD-X272BT Specifications

General IconGeneral
DIN size-
Output power400 W
Product colorBlack
Volume controlRotary
High pass filterYes
Disc types supportedNo
Audio output channels- channels
Equalizer bands quantity13
Maximum power per channel50 W
Audio formats supportedAAC, FLAC, MP3, SBC, WAV, WMA
Display typeLCD
Bluetooth version4.2
USB port positionFront
Bluetooth profilesA2DP, AVRCP, PBAP
Line outputs (RCA)1
USB connector typeMini-USB A
Bluetooth functionsHandsfree calling
Hands-free callingKeep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Package width900 mm
AM band range153 - 531 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Weight and Dimensions IconWeight and Dimensions
Weight600 g

Related product manuals