JVC KD-X341BT User Manual

ENGLISH
5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GETTING STARTED RADIO
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
Search for a station
1
Press repeatedly to select FM, AM, SW1 or SW2.
2 Press (or press on the remote control) to search for a station automatically.
(or)
Press and hold (or press and hold on the remote control) until “M” flashes,
then press repeatedly to search for a station manually.
Settings in memory
You can store up to 18 stations for FM and 6 stations for AM/SW1/SW2.
Store a station
While listening to a station....
Press and hold one of the number buttons (1 to 6).
(or)
1 Press and hold the volume knob until “PRESETMODE” flashes.
2 Turn the volume knob to select a preset number, then press the knob.
The preset number flashes and “MEMORY” appears.
Select a stored station
Press one of the number buttons (1to6).
(or)
1 Press .
2 Turn the volume knob to select a preset number, then press the knob.
CLOCK
TIME SYNC
ON :The clock time is automatically set
using the Clock Time (CT) data in FM Radio
Data System signal.;
OFF :Cancels.
CLOCK DISPLAY ON :The clock time is shown on the
display even when the unit is turned off.;
OFF :Cancels.
ENGLISH Select the display language for menu and
music information if applicable.
By default,
ENGLISH is selected.
ESPANOL
JS_JVC_KD-X341BT_M_EN_2.indd 5JS_JVC_KD-X341BT_M_EN_2.indd 5 9/8/2016 12:19:50 PM9/8/2016 12:19:50 PM

JVC KD-X341BT Specifications

General

Brand	JVC
Model	KD-X341BT
Category	Car Receiver
Language	English