Remote controller
USB input terminal
Front AUX input jack
DO NOT expose to bright sunlight.
Remote sensor
Display window
Control dial
Control panel
(For KD-X40 only)
Aim the remote controller directly at the sensor.
When you press or hold the following button(s)...
Control panel
Remote
controller
General function
/SOURCE
—
Turns on.
Turns off. (Hold)
Press the /SOURCE button on the control panel and turn
the control dial within 2 seconds to select the source.
SOURCE Press repeatedly to select the source.
Control dial
(turn)
VOL - / + Adjusts the volume level.
— Selects items.
Control dial
(press)
)
Mutes the sound or pauses playback.
Press the button again to cancel muting or resume
playback.
— Confirms selection.
—
Enters <BRIGHTNESS> menu directly. (KD-X30 only)
(' page 12)
iPod —
Switches to iPod source. (KD-X40 only)
Switches the iPod mode when in the iPod source. (KD-X40
only) (' page 9)
EQ SOUND
Selects the preset sound mode. (' page 12)
—
Activates/deactivates TA Standby Reception. (' page 7)
Enters PTY Search mode. (Hold) (' page 7)
Returns to the previous menu.
Exits from the menu. (Hold)
/ /
Selects a preset station. (' page 6)
Selects MP3/WMA folder. (' page 8)
/
/
Searches for a station automatically. (' page 6)
Searches for a station manually. (Hold)
Selects track. (' page 8, 9)
Fast-forwards or reverses track. (Hold)
.
KD-X30 can be remotely controlled as instructed here (with an optionally purchased remote
controller). We recommend that you use remote controller RM-RK52 with your unit.
Basic operations
Basic operations
4
|ޓENGLISH
2011/11/8ޓ22:24:41KD-X40_E_EN
To Next Page
Loading...
