JVC KD-X560BT - Bluetooth and Sound Settings Adjustment

15
English |
Setup
Continued on the next page...
Bluetooth Settings
Sync
Phonebook
ON/OFF: Activates or deactivates the
synchronization of the phonebook
in the connected smartphone with
the unit.
BT
Information
Displays the information about the
connected Bluetooth device (device
name, phone name, and mac address).
Sound settings
1 Press < > to display the sound setting.
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected/
activated or follow the instructions stated on
the selected item.
4 Press < >.
Graphic
Equalizer
Selects a preset equalizer suitable to the
music genre.
Flat / DRVN / Hard Rock / Hip Hop / Jazz
/ Pop/ R & B / User / Classical
Select [User] to use the settings made
1) Press the volume knob to select the
frequency.
2) Turn the volume knob to adjust the
level.
3) Press <
>.
Loudness Sets the amounts of boost of low and
high tones.
“ON”, “OFF” (Default)
X’over You can set the crossover frequency of
speakers.
1) Press <E>/<F> to select the
speaker.
2) Press the volume knob to select the
item.
3) Turn the volume knob to adjust the
value.
4) Press <
>.
Delay Adjust the sound delay time so that the
sounds from different speakers arrive at
the listener sitting on the selected seat
at the same time.
1) Press <E>/<F> to select the
speaker.
2) Turn the volume knob to adjust the
value.
3) Press <
>.
KD-X560BT_E_1En.indd 15 2019/04/11 8:08