W
williamcuevasAug 8, 2025
Why is there no sound from the speakers of my JVC KS-FX222?
- AAlexis Mcclure MDAug 8, 2025
If you cannot hear any sound from the speakers, there might be a few reasons. First, the connections could be incorrect, so check the cords and connections. Second, the volume level might be set to the minimum; try adjusting it to an optimum level. Finally, the built-in microcomputer may be malfunctioning due to noise. To resolve this, press and hold both the SEL (select) and buttons at the same time for several seconds to reset the unit. Note that this will erase the clock setting and preset stations stored in memory.