JVC KW-ADV794 Connect And Set Up

1 page

1 Check the connected cable.

■ To listen to the music: USB 2.0 cable (accessory of the

iPod/iPhone)

■

To iPod/iPhone

USB cable from the

rear of the unit

To watch the video and listen to the music: USB Audio

and Video cable JVC KS-U30 (separately purchased)

Caution

Videos cannot be played if connected with any cable other

than JVC KS-U30.

2 Set <Input> on the unit.

The item to set on the unit varies depending on the

connected cable.

1. Turn off the AV source.

2. Display the <Settings> screen.

3. Display the <Input> screen.

JVC KS-U30

(separately

purchased)

Connections and Settings for Using iPod/iPhone on the Unit Using iPhone Navigation App (MotionX-GPS)

4. When connected with a USB 2.0 cable:

Set <Audio Input> to <AV-IN>.

For KW-AVX848/KW-AVX840/KW-ADV794/

KW-AVX748/KW-AVX740

For KW-AVX640

You can listen to the music.

When connected with JVC KS-U30:

Set <Audio Input> and <Video Input> to <iPod>.

For KW-AVX848/KW-AVX840/KW-ADV794/

KW-AVX748/KW-AVX740

For KW-AVX640

You can watch the video and listen to

the music.

EN / SP / FR / PT

LVT2312-002A

[J/JW]

For Americas

1 Confirm that the unit is connected with JVC

KS-U30 (separately purchased).

MotionX-GPS cannot be used if connected with any cable

other than JVC KS-U30.

2 Change the settings for using MotionX-GPS.

1. Turn off the AV source.

2. Set <Input> on the unit.

JVC KS-U30

(separately

purchased)

Set <Audio Input> and <Video Input> to

<iPod>.

For KW-AVX848/KW-AVX840/KW-ADV794/

KW-AVX748/KW-AVX740

For KW-AVX640

3. Display the “

iPod

” source control screen.

4. Display the <Mode> screen.

5. Set <iPod Control> to <External>.

3 Start MotionX-GPS from your iPhone.

4 Select “

iPod

” as the source.

The map displayed on the connected iPhone appears on

the unit’s display.

Caution

MotionX-GPS cannot be operated on the unit. Use iPhone to

operate it.

• iPod and iPhone are trademarks of Apple Inc., registered in

the U.S. and other contries.

KW-AVX848 / KW-AVX840

KW-ADV794 / KW-AVX748 / KW-AVX740

KW-AVX640

Notice_sheet.indd 1Notice_sheet.indd 1 11/07/01 14:1411/07/01 14:14

Other manuals for JVC KW-ADV794

Instructions88 pages

Questions and Answers:

D
Dawn MooreAug 27, 2025
What to do if JVC KW-ADV794 Receiver neither recognizes nor plays back a disc?
- C
  casetonyaAug 27, 2025
  If your JVC Receiver is unable to recognize or play a disc, eject the disc forcibly.
A
Ashley CollinsAug 27, 2025
How to fix 'Pairing Error' on JVC KW-ADV794 Receiver?
- M
  Matthew NguyenAug 27, 2025
  If you encounter a 'Pairing Error' on your JVC Receiver, it means the pairing between the unit and the Bluetooth device has failed. Try registering the device again.
K
Keith HarrisonAug 27, 2025
What does 'Miswiring' mean on JVC Receiver?
- S
  Shannon DyerAug 27, 2025
  A 'Miswiring' message on your JVC Receiver indicates that a speaker cord has shorted or come into contact with the car chassis. Wire or insulate the speaker cord as needed, then reset the unit.
S
Samantha ButlerAug 27, 2025
What to do if JVC KW-ADV794 satellite radio does not work?
- R
  Ronald GilbertAug 28, 2025
  If the satellite radio on your JVC Receiver is not working, try reconnecting the Satellite radio after a few seconds.
A
aprilbrownAug 28, 2025
Why JVC KW-ADV794 Receiver cannot play recordable or rewritable discs?
- K
  Kathleen WagnerAug 28, 2025
  If your JVC Receiver is unable to play recordable or rewritable discs: * Ensure you insert a finalized disc. * Finalize the discs with the component used for recording.
A
Amanda TaylorAug 28, 2025
Why JVC Receiver playback does not start?
- C
  careydeborahAug 28, 2025
  If playback does not start on your JVC Receiver, the format of the files may not be supported by the unit.
S
Sandra McgeeAug 25, 2025
How to fix JVC Car Receiver when no sound comes out of speakers?
- L
  Luis BennettAug 25, 2025
  If no sound is coming from the speakers of your JVC Car Receiver, first, make sure that the volume is at an audible level. If the volume is okay, check the cords and connections to ensure everything is properly connected.
N
Nicholas WolfeAug 29, 2025
How to fix 'Now Reading...' flashing on JVC KW-ADV794 screen?
- C
  cjohnsonAug 29, 2025
  If 'Now Reading...' keeps flashing on the screen of your JVC Receiver, turn the power off and then on again.
J
Jacqueline MooreAug 29, 2025
Why is sound interrupted while playing track on JVC KW-ADV794 Receiver?
- T
  twalkerAug 30, 2025
  If the sound is sometimes interrupted while playing a track on your JVC Receiver, the tracks may not be properly copied onto the USB device. Copy the tracks again and try again.
S
Shirley MossAug 30, 2025
What to do if JVC KW-ADV794 Receiver has no sound from iPod?
- A
  Austin DonaldsonAug 30, 2025
  If no sound is coming from the speakers when using an iPod with your JVC Receiver: * Disconnect the iPod and then reconnect it. * Select another source and then reselect “iPod”.