A
Amanda TaylorAug 28, 2025
Why JVC Receiver playback does not start?
- CcareydeborahAug 28, 2025
If playback does not start on your JVC Receiver, the format of the files may not be supported by the unit.
To Next PageTo Next PageWhy JVC Receiver playback does not start?
If playback does not start on your JVC Receiver, the format of the files may not be supported by the unit.
Why JVC KW-ADV794 Receiver cannot play recordable or rewritable discs?
If your JVC Receiver is unable to play recordable or rewritable discs: * Ensure you insert a finalized disc. * Finalize the discs with the component used for recording.
What to do if JVC KW-ADV794 satellite radio does not work?
If the satellite radio on your JVC Receiver is not working, try reconnecting the Satellite radio after a few seconds.
How to improve phone sound quality on JVC Receiver?
If the phone sound quality is poor on your JVC Receiver: * Reduce the distance between the unit and the Bluetooth mobile phone. * Move the car to a place where you can get better signal reception.
What does 'No BT Dongle' mean on JVC KW-ADV794 Receiver?
Bluetooth adapter (KS-UBT1) is removed.
Why does my JVC Car Receiver say 'Miswiring Check wiring connection and then reset unit'?
This message appears because a speaker cord has shorted or is in contact with the car's chassis. To fix this, wire or insulate the speaker cord appropriately and then reset the unit.
What does 'Initialize Error' mean on JVC Car Receiver?
If your JVC Car Receiver displays an “Initialize Error”, it means the unit has failed to initialize the Bluetooth module. Try the operation again.
What causes 'USB Device Error' on JVC KW-ADV794 Receiver and how to fix it?
A 'USB Device Error' on your JVC Receiver may occur if the USB power voltage is abnormal. To resolve this: * Turn the unit off and then back on. * Try connecting a different USB device.
How to fix JVC KW-ADV794 Receiver when no sound comes out of the speakers?
If no sound is coming from the speakers connected to your JVC Receiver: * Ensure the volume is adjusted to an audible level. * Inspect the speaker cords and connections to confirm they are properly connected.
What to do if JVC Receiver shows 'No Signal'?
If your JVC Receiver displays 'No Signal', try the following: * Start playback on the external component connected to the VIDEO IN jack. * Check the cords and connections to ensure they are secure. * Consider that the signal input might be too weak.
General
