EasyManua.ls Logo

JVC KW-AVX720 - Disc and USB Playback Functions

JVC KW-AVX720
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
ENGLISH
Disc operations
The disc type is automatically detected, then playback starts (for some discs, the top menu of the disc appears).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
If “
” appears on the screen, the unit cannot accept the operation you have tried to do.
In some cases, without showing “ ,” operations will not be accepted.
! Insert a disc.
Monitor panel closes automatically.
If not, press [Close].
Caution:
Do not place your finger behind the monitor panel.
~ Open the monitor panel.
<Open/Tilt> menu is displayed.
By pressing and holding the button, you can
open the monitor panel and eject the disc.
Ÿ
When playing back a multi-channel encoded disc,
the multi-channel signals are downmixed.
You can fully enjoy multi-channel sound by
connecting an amplifier or a decoder compatible
with these multi-channel sources. ( 55)
To select the playback mode, 23, 24.
To select tracks on the list, 25.
Label side
Open/Tilt
Prohibiting disc ejection
You can lock a disc in the loading slot.
To cancel the prohibition, repeat the same
procedure to select <EJECT OK?>.
Discs can be forcibly ejected. ( 3)
Back
EN30-37_KW-AVX720_001A_1.indd 32EN30-37_KW-AVX720_001A_1.indd 32 12/19/08 3:48:14 PM12/19/08 3:48:14 PM

Other manuals for JVC KW-AVX720

Related product manuals