10
ENGLISH
When an FM stereo broadcast is
hard to receive
1 Press [AV MENU].
• You can also use AV MENU on the monitor panel.
2 Press [Mode].
Listening to the radio
~
Press [SOURCE], then press [TUNER]. (☞ page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ Press [BAND].
! Press [4] or [¢] to search for a station—Auto Search.
• Manual Search: Hold either [4]or [¢] until “Manual Search” appears on the display, then press it
repeatedly.
• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.
3
Reception improves, but stereo effect will be lost.
• The MONO indicator lights up.
To restore stereo effect, select <Off>.
Preset No.
Band
Tuner indicators
☞ page 9
Sound mode
☞ page 51
☞ page 51
: Buttons on the
touch panel. In
the explanation,
they are indicated
inside [ ].
Assigned station name (
☞ page 52). If no name is assigned,
“No Name” appears.
EN08-12_KW-AVX800J_f.indd 10EN08-12_KW-AVX800J_f.indd 10 07.2.14 11:18:48 AM07.2.14 11:18:48 AM
To Next Page
Loading...
