JVC KW-AVX800 - Monitor Screen Operation Buttons; On-Screen Playback Controls; Entering Numbers and Titles

OPERATIONS
17
ENGLISH
Touch the screen (center portion).
Touch [KEY].
Operation buttons on the monitor screen
You can display the following operation buttons while watching the playback pictures on the monitor.
• While the operation buttons are displayed, aspect ratio is fixed to <Full> (☞ page 55).
• If no operation is done for about 5 seconds, the operation buttons disappears (except when a disc menu is
displayed).
Touch [KEY].
☞ pages 20 to 22 on how the operation buttons
particularly work for a variety of the discs.
To erase the operations, touch the screen again.
A
[SOURCE] Display the <Source Menu>
[
AV MENU] Display the <AV Menu>
[
SHORT CUT ] Display the Short Cut buttons
[3 / 8] Start and pause playback
[7] Stop playback
[4 ¢] Press: Select track
Hold: Reverse/forward search
[5 ∞] Select folders
• The above buttons also work when they are not shown on
the touch panel (while watching pictures on the screen).
* While a disc menu is played back for DVD, [KEY] is
automatically displayed. On the disc menu, you can select a
menu item directly by touching it on the screen.
B
For DVD/VCD/DivX menu operation playback
[2 3 5 ∞] Select the menu items
[
ENT] Confirm the selection
[
TOP MENU]Display the disc menu
[
MENU] Display the disc menu
[
RETURN] Return to the previous menu or display the
menu (only for VCD with PBC)
C
For entering the numbers
[
DIRECT CLR] Switch between chapter/track entry and
title/group/folder entry
Erase the last entry when you enter a wrong
number
[
0]–[9]=[ENT] Enter the number
Ex. To enter “105”: press [
1], [0], [5], then [ENT]
Touch [KEY].
*
EN13-33_KW-AVX800J_f.indd 17EN13-33_KW-AVX800J_f.indd 17 07.2.15 10:50:13 AM07.2.15 10:50:13 AM