EasyManua.ls Logo

JVC KW-AVX800 - Disc Playback Settings; DivX Registration and Dynamic Range; Speaker Size and Level Adjustments

JVC KW-AVX800
237 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SETTINGS
57
ENGLISH
Menu items Selectable settings, [reference page]
Disc
Divx Regist. (Registration)*
7
This unit has its own Registration Code. Once you have played back a
file with which the Registration Code recorded, this unit’s Registration
Code is overwritten for copyright protection.
D. (Dynamic) Range Compres.
(Compression)*
7
You can enjoy a powerful sound at a low volume level while playing
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
Speaker Size*
7
You can adjust the speaker size setting.
As you change the speaker size, the speaker on the screen changes its
size. When <None> or <Off> is selected, the speaker is shaded.
L/R (Front): Small, Large
C (Center): None, Small, Large
LS/RS (Surround): None, Small, Large
SW (Subwoofer): On, Off
Speaker size: <Large> for 13-cm (5-1/8 inches) diameter or more;
<Small> for 13 cm (5-1/8 inches) or less.
If you select <Large> or <Small> for non-connected speakers, the
incoming signals for the non-connected speakers will not come out
of any other speakers.
Front speakers and surround speakers cannot be adjusted separately
for left and right speakers.
Regardless of the setting above...
No sound comes out of the subwoofer while playing Dolby Pro Logic
II Movie or Music if the front speaker is set to <Large>.
No sound comes out of the center speaker when surround is
deactivated.
Speaker Level*
8
You can adjust the output level of the activated speakers (
<Speaker Size> above), monitoring the test tone.
L/C/R/RS/SW*
9
/LS: : adjust the output level of each speaker in the
range of –10dB to +10dB; Initial 00dB.
Press [Test] to turn on and off the test tone.
*
7
Selectable only for “DISC,” “SD,” and “USB.” (Playback stops when you change the setting.)
*
8
Selectable only for “DISC,” “SD,” and “USB.”
*
9
This subwoofer level setting takes effect only when surround is activated. ( also page 24)
Continued on the next page
EN51-63_KW-AVX800J_f.indd 57EN51-63_KW-AVX800J_f.indd 57 07.2.14 11:28:21 AM07.2.14 11:28:21 AM

Table of Contents

Other manuals for JVC KW-AVX800

Related product manuals