EasyManua.ls Logo

JVC KW-AVX800 - Advanced Audio and Mode Settings; Crossover, Amplifier Gain, Rear Speaker Settings; Mode Settings (Mono, DX;Local, SSM); List Menu Access

JVC KW-AVX800
237 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SETTINGS
61
ENGLISH
Crossover Adjust the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
Amplifier Gain You can change the maximum volume level of this unit.
Off: Deactivates the built-in amplifier.
Low: VOL 00 to 30 (Select this if the maximum power of the speakers is less
than 50 W)
High: VOL 00 to 50
Rear Speaker
*
20
You can activate/deactivate the rear speakers.
Off, On
*
20
This setting takes effect only when Dual Zone is activated. ( also page 27)
Mode*
21
Menu items Selectable settings, [reference page]
Mono
Only for FM. (Off, On), [10]
DX/Local
Only for FM. (Local, DX), [11]
SSM
Only for FM. Press and hold to start SSM. [11]
Title Entry
Only for FM/AM stations, AV-IN, and EXT-IN. [52]
Intro/Repeat/Random
[18, 31, 33, 42, 47]
*
21
Items listed under <Mode> vary among the playback sources.
List
For “DISC”: Folder List and Track List ( page 19)
For “CD-CH”: Disc List, Folder List, and Track List ( page 41)
For “SAT”: Category List and Channel List ( page 45)
For the other playback sources, you can display a list by pressing DISP on the monitor panel ( page 9).
Continued on the next page
EN51-63_KW-AVX800J_f.indd 61EN51-63_KW-AVX800J_f.indd 61 07.2.14 11:28:31 AM07.2.14 11:28:31 AM

Table of Contents

Other manuals for JVC KW-AVX800

Related product manuals