To Next PageTo Next Page
Why is elapsed playing time incorrect on JVC Car Receiver?
If the elapsed playing time is not correct on your JVC Car Receiver, this sometimes occurs during playback due to how the tracks are recorded on the disc.
Why JVC Car Receiver tracks do not play in order?
If the tracks on your JVC Car Receiver do not play back in the order you intended, note that the playback order is determined when the files are recorded.
Why does JVC KW-HDR720 Car Receiver keep 'READING'?
If “READING” keeps flashing on the display of your JVC Car Receiver, a longer readout time is required. Avoid using too many hierarchical levels and folders.
How to fix JVC KW-HDR720 Car Receiver when sound cannot be heard from the speakers?
If you can't hear any sound from the speakers of your JVC Car Receiver, first, adjust the volume to an audible level. Then, ensure that the unit is not muted or paused. Finally, check all cords and connections to make sure they are properly connected.
What does 'IN DISC' mean on JVC Car Receiver?
If “IN DISC” appears on the display of your JVC Car Receiver, the disc cannot be ejected properly. Ensure that nothing is blocking the loading slot.
Why does my JVC KW-HDR720 Car Receiver say 'NO DISC'?
If your JVC Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
Why does JVC KW-HDR720 sound quality change on HD Radio?
If the sound quality changes when receiving HD Radio stations on your JVC Car Receiver, fix the reception mode either to ANALOG or DIGITAL.
Why is there static noise on my JVC KW-HDR720 Car Receiver radio?
If you are experiencing static noise while listening to the radio on your JVC Car Receiver, ensure that the antenna is firmly connected.
What to do if JVC Car Receiver shows 'MISWIRING CHK WIRING' error?
If your JVC Car Receiver displays “MISWIRING CHK WIRING THEN RESET UNIT” or “WARNING CHK WIRING THEN RESET UNIT” and you cannot perform any operations, make sure the terminals of the speaker leads are properly covered with insulating tape. After checking the speaker leads, reset the unit. If the message persists, it is recommended to consult your JVC car audio dealer or a company supplying kits.
What to do if JVC Car Receiver says “CANNOT PLAY” for USB?
If “CANNOT PLAY” or “NO USB” appears on the display, or if the unit cannot detect the USB device on your JVC Car Receiver, verify that the connected USB device is compatible with the unit. You can also try reattaching the USB device.
General| Category | Car Receiver |
|---|---|
| DIN Size | Double DIN |
| Display Type | LCD |
| HD Radio | Yes |
| Bluetooth | Yes |
| USB Input | Yes |
| USB Ports | 1 |
| AUX Input | Yes |
| CD Playback | No |
| DVD Playback | No |
| SiriusXM Ready | Yes |
| Pandora control | Yes |
| iHeartRadio control | Yes |
| Power Output | 50W x 4 |
| AM/FM Tuner | Yes |
| Built-in Navigation | No |
| iPod/iPhone Control | Yes |
| Steering Wheel Control | Yes |
| Rear View Camera Input | Yes |
| Preamp Voltage | 4V |
| EQ Bands | 13-Band |
| Audio Formats Supported | MP3, WMA |
| Display Color | Variable |
