JVC KW-NSX600 - Listening to the Ipod;Iphone Device; Preparation

26
ENGLISH
iPod/iPhone that can be connected to this unit:
Made for
– iPod with video
– iPod classic
– iPod nano (6th Generation)
– iPod nano (5th Generation)
– iPod nano (4th Generation)
– iPod nano (3rd Generation)
– iPod touch (4th Generation)
– iPod touch (3rd Generation)
– iPod touch (2nd Generation)
– iPod touch (1st Generation)
– iPhone 4S
– iPhone 4
– iPhone 3GS
– iPhone 3G
– iPhone
Connecting iPod/iPhone
Connect your iPod/iPhone using the appropriate cable
according to your purpose.
• To listen to music: USB 2.0 cable (accessory of the
iPod/iPhone)
To iPod/iPhone
USB cable from the
rear of the unit
• To watch video and listen to music: USB
Audio and Video cable for iPod/iPhone—KS-U30
(separately purchased) (☞ page 73 )
Caution:
• Video is not displayed on the screen if connected with
any cable other than KS-U30.
Listening to the iPod/iPhone device
Preparation
• To use App of iPod touch/iPhone (such as MotionX-GPS Drive), ☞ page 30.
• To listen to Pandora, ☞ page 32.
Setting <AV Input> for iPod/iPhone
playback
Select an appropriate input setting for <AV Input>
according to the connection method of the iPod/iPhone.
• Only for KW-NSX700: Make sure that “
AV Off ” is
selected as the rear source. (☞ page 38)
• When <Input> in <Display Input> is set to
[iPhone], <AV Input> is always set to [iPod].
1 Turn off the AV source.
On <HOME> screen:
2 Display the <Input> screen.
3
AV-IN Select this when the iPod/iPhone is
connected using the USB 2.0 cable
(accessory of the iPod/iPhone).
iPod Select this when the iPod/iPhone is
connected using KS-U30 (separately
purchased).
EN_KW-NSX700/600[J].indb 26EN_KW-NSX700/600[J].indb 26 12/11/14 14:2312/11/14 14:23