JVC KW-NSX600 - Ipod;Iphone Playback Operations for <Ipod Out> Mode

29
ENGLISH
Selecting a track/video from menu
on the iPod/iPhone
1
2 Select the menu (audio or video) (1), a
category (2), then a desired item (3).
• Select the item in the selected layer until a
desired track starts playing.
Audio menu:
Switches between audio ( ) and video
( )
Returns to the
previous layer
Plays all items in the layer
Returns to the top layer
*
Video menu:
Switches between audio ( ) and video
( )
• Available categories differ depending on the type of
your iPod/iPhone.
* You can switch to the top of the category by pressing
the corresponding tab: Playlist (
), Artist ( ),
Albums (
) or Songs( ).
iPod/iPhone playback
operations for <iPod Out>
mode
• Connect the iPod/iPhone using KS-U30 (separately
purchased). (☞ page 73 )
• Select [iPod] for <AV Input>. (☞ page 26)
• Make sure to select [iPod Out] for <iPod Control>.
(☞ page 27)
• Select “
iPod ” as the source. (☞ page 12)
Selecting a track from the menu on
the iPod/iPhone
[5] [∞] Selects a category.
[Select/6] Confirms the selection.
[iPod Menu] Returns to the previous layer.
[Mode]* Changes the settings for iPod
playback. (☞ page 27)
* When the operation buttons
are not displayed on the screen,
touch the area shown on the
illustration.
Operations during playback
[2] [3] Skips to the previous/next track.
[Select/6] Starts/pauses playback.
[iPod Menu] Displays the menu.
EN_AV_USB-iPod.indd 29EN_AV_USB-iPod.indd 29 12/11/21 14:1712/11/21 14:17