JVC KW-NSX600 - Setting up Bluetooth

55
ENGLISH
Setting up Bluetooth
To display the <Bluetooth Setup> screen, ☞ page 53.
Menu items Selectable setting/item Initial: Underlined
Phone Connection
♦ Connect
♦ Disconnect
: ☞ page 54
: ☞ page 54
Phone Device Shows the phone device name.
Audio Connection
♦ Connect
♦ Disconnect
: ☞ page 54
: ☞ page 54
Audio Device Shows the audio device name.
Pandora Connection
♦ Connect
♦ Disconnect
: ☞ page 54
: ☞ page 54
Pandora Device Shows the Pandora device name.
PIN Code
Changes the PIN code of the unit. (☞ page 53)
• Touch the current PIN code, enter a new PIN code, then press [Save].
Device Name Shows the device name to be shown on the Bluetooth device—JVC Unit.
Device Address Shows the MAC address of the unit.
Auto Connect
♦ On
♦ Off
: The connection is automatically established with the last
connected Bluetooth device when the unit is turned on.
: Cancels.
HF/Audio Output Select the speakers used for Bluetooth (both phone use and audio player).
♦ Front
♦ All
: From front speakers only.
: From all speakers.
Initialize Hold [Enter] to clear the registration of Bluetooth devices and memory of the preset list
and call lists.
EN_KW-NSX700/600[J].indb 55EN_KW-NSX700/600[J].indb 55 12/11/14 14:2412/11/14 14:24