To Next PageTo Next PageWhy does the sound skip when using a Bluetooth audio player with my JVC Receiver?
If the sound is interrupted or skipped while using a Bluetooth audio player with your JVC Receiver: * Reduce the distance between the unit and the Bluetooth audio player. * Disconnect the device connected for Bluetooth phone. * Turn off, then turn on the unit. * If the sound is still not restored, connect the player again.
Why is the sound interrupted while playing a track on my JVC Receiver?
If the sound is sometimes interrupted while playing a track on your JVC Receiver, it could be because the tracks were not properly copied to the USB device. Copy the tracks again and try again.
How to unlock disc on JVC Receiver?
If the disc cannot be ejected from your JVC Receiver, unlock the disc.
How to fix distorted sound on my JVC Receiver?
If the sound is distorted on your JVC Receiver, deactivate the equalizer either on the unit or the iPod/iPhone.
Why my Bluetooth device does not detect JVC Receiver?
If your Bluetooth device isn't detecting your JVC Receiver: * Check whether the Bluetooth adapter (KS-UBT1) is inserted correctly. * Try searching from the Bluetooth device again.
What to do if my JVC Receiver does not work at all?
If your JVC Receiver is not working at all, try resetting the unit.
Why is the phone sound quality poor on my JVC Receiver?
If the phone sound quality is poor on your JVC Receiver: * Reduce the distance between the unit and the Bluetooth mobile phone. * Move the car to a place where you can get better signal reception.
What to do if my JVC Receiver says 'No Signal'?
If your JVC Receiver displays a “No Signal” message: * Start playback on the external component connected to the VIDEO IN jack. * Check the cords and connections. * The signal input may be too weak.
What does 'No BT Dongle' mean on my JVC Receiver?
If your JVC Receiver displays "No BT Dongle", the Bluetooth adapter (KS-UBT1) is removed.
What does 'USB Device Error' mean on my JVC Receiver and how to fix it?
If you encounter a “USB Device Error” or “Device Error” on your JVC Receiver, it could be due to an abnormal USB or micro-USB power voltage. Try turning the unit off and on again. If that doesn't work, connect another USB device or smartphone.
General| Brand | JVC |
|---|---|
| Model | KW-NSX700 |
| Category | Car Video System |
| Language | English |
How to adjust the equalizer settings for different sound modes.
How to adjust brightness, contrast, blackness, color, tint, and detail.
How to enable the rear view camera function.
How the rear camera view appears when shifting to reverse.
Steps to save current settings to a user profile.
Steps to load saved settings from a user profile.
Steps to pair, connect, and disconnect Bluetooth devices.
How to handle incoming calls via Bluetooth.
How to make calls using direct entry, presets, or voice dialing.
Troubleshooting based on specific error messages displayed.
Troubleshooting guide based on common symptoms.
Step-by-step guide for installing the unit into the vehicle.
