To Next PageTo Next PageWhy is my iPod/iPhone not working with my JVC Receiver?
If your iPod/iPhone isn't turning on or working with your JVC Receiver: * Check the connecting cable and its connection. * Update the firmware version. * Charge the battery. * Check whether the iPod control mode is correctly selected. * Reset the iPod/iPhone.
How to fix no sound coming from the speakers on my JVC Receiver?
If no sound is coming from the speakers of your JVC Receiver: * Adjust the volume to an audible level. * Check the cords and connections to ensure they are properly connected.
Why is there static noise on my JVC Receiver when listening to the radio?
If you are experiencing static noise while listening to the radio on your JVC Receiver, ensure the antenna is firmly connected.
What to do if my JVC Receiver shows 'MISWIRING' or 'WARNING' message?
If you see a “MISWIRING” or “WARNING” message on your JVC Receiver, it means a speaker cord has shorted or is touching the car's chassis. To fix this, wire or insulate the speaker cord properly, and then reset the unit.
Why JVC KW-NSX700 does not pair with Bluetooth device?
• For devices compatible with Bluetooth 2.1: Register the device using a PIN code. • For devices compatible with Bluetooth 2.0: Enter the same PIN code for both the unit and target device. If the PIN code of the device is not indicated on its instructions, try “0000” or “1234.”
Why Bluetooth device does not detect JVC KW-NSX700 Car Video System?
If the Bluetooth device does not detect the unit: • Check whether the Bluetooth adapter (KS-UBT1) is inserted correctly. • Search from the Bluetooth device again.
Why is sound interrupted with Bluetooth on JVC KW-NSX700 Car Video System?
If the sound is interrupted or skipped while using a Bluetooth audio player with your JVC Car Video System: • Reduce the distance between the unit and the Bluetooth audio player. • Disconnect the device connected for Bluetooth phone. • Turn off, then turn on the unit. • (When the sound is not yet restored) connect the player again.
Why is the [AV-IN] or [Apps] button missing from the home screen on my JVC Receiver?
If the desired source button ([AV-IN] or [Apps]) is not displayed on the screen of your JVC Receiver, select an appropriate setting for .
Why can't I copy my phone book to my JVC Receiver?
The unit does not respond when you try to copy the phone book to the unit, because you may have tried to copy the same entries (as stored) to the unit.
Why won't my JVC Receiver pair with my Bluetooth device?
If your JVC Receiver does not pair with the Bluetooth device: * For devices compatible with Bluetooth 2.1: Register the device using a PIN code. * For devices compatible with Bluetooth 2.0: Enter the same PIN code for both the unit and target device.
General| Brand | JVC |
|---|---|
| Model | KW-NSX700 |
| Category | Car Video System |
| Language | English |
How to adjust the equalizer settings for different sound modes.
How to adjust brightness, contrast, blackness, color, tint, and detail.
How to enable the rear view camera function.
How the rear camera view appears when shifting to reverse.
Steps to save current settings to a user profile.
Steps to load saved settings from a user profile.
Steps to pair, connect, and disconnect Bluetooth devices.
How to handle incoming calls via Bluetooth.
How to make calls using direct entry, presets, or voice dialing.
Troubleshooting based on specific error messages displayed.
Troubleshooting guide based on common symptoms.
Step-by-step guide for installing the unit into the vehicle.
