JVC KW-NX7000 User Manual

Installation settings _
Initial settings
When you turn on the unit for the first time, the initial A
setup screen appears. Follow the procedure below and ~
make the necessary settings.
Indication language:
In this manual, English indications are used for
the purpose of explanation. You can select the
indication language.
o Turn on the power.
llS=o c::=::::l c:J 0 JVC 0 c::J ~ 011 J
-----
o""n~
• Select the language you want for the
display and the voice guidance.
The power is turned off then turned on
automatically so that your setting takes effect.
7
Normally select [Start Installation Settings].
• If you select [Skip Installation Settings
(for store display)), the System starts in the
navigation demonstration mode for stores
(1& page 53).
You need to make the settings you turn on the
power next time.
Continued on the next page
INTRODUCTION

JVC KW-NX7000 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Display diagonal	7 \
Display resolution	336 x 960 pixels